ANYCUBIC_Kossel Manual-20170105.pdf

Documents

31 pages
97 views

Please download to get full document.

View again

of 31
All materials on our website are shared by users. If you have any questions about copyright issues, please report us to resolve them. We are always happy to assist you.
Share
Description
AN YC UB IC AN YC UB IC Safety Instructions Please read the safety instructions carefully before get started. ANYCUBIC 3D printer generates high temperature. Do not reach inside of the printer during operation. Allow time for the printer to cool down after printing. Contact with the extruded material may cause burns. Wait for printed objects to cool before removing them from the build platform.
Transcript
        Safety Instructions Please read the safety instructions carefully before get started.  ANYCUBIC  3D printer generates high temperature. Do not reach inside of the printer during operation. Allow time for the printer to cool down after printing. Contact with the extruded material may cause burns. Wait for printed objects to cool before removing them from the build platform.  ANYCUBIC  3D printer includes moving parts that can cause injury.  Vapors or fumes may be irritating at operating temperature. Always use the  ANYCUBIC  3D printer in an open, well ventilated area. Be cautious when using the scraper. Never direct the scraper towards your hand. The  ANYCUBIC  3D printer MUST NOT be exposed to water or rain. The  ANYCUBIC  3D printer is designed to be used within ambient temperature ranging 8 º C-40 º C, and humidity ranging 20%-50%.  Working outside those limits may result in low quality printing. In case of emergency, immediately turn off the  ANYCUBIC  3D printer. It is recommended to use protection glasses when cleaning/sanding printed models to avoid small particles contacting eyes. Never leave the  ANYCUBIC  3D printer unattended during operation.  Technical Specification PRINTING Printing Technology: FDM (Fused Deposition Modeling) Build Size: Ø180×300 mm (Ø230×300 mm for Linear Plus) Layer Resolution: 0.1-0.4 mm Positioning Accuracy: X 0.01mm Y 0.01mm  Z 0.01mm Extruder Quantity: Single Nozzle Diameter: 0.4 mm Print Speed:   20~80mm/s Travel Speed: 150mm/s Supported Print Materials: PLA, ABS, HIPS, Wood TEMPERATURE  Ambient Operating Temperature: 8 º C - 40 º C Operational Extruder Temperature: 275 º C Operational Print Bed Temperature: N/A SOFTWARE Slicer Software: Cura Cura Input Formats: .STL, .OBJ, .DAE, .AMF Cura Output Formats: GCode Connectivity: SD Card, USB Port (expert users only) ELECTRICAL Input Rating: 100-240V AC, 50/60Hz, 1.5A PHYSICAL DIMENSIONS Printer Dimensions: 315mm ( Δ ) × 680mm (Height) 380mm ( Δ ) × 680mm (Height) for Linear Plus.  Weight: ~5kg-Pulley, ~6kg-Linear, ~6.8kg-Linear Plus
We Need Your Support
Thank you for visiting our website and your interest in our free products and services. We are nonprofit website to share and download documents. To the running of this website, we need your help to support us.

Thanks to everyone for your continued support.

No, Thanks
SAVE OUR EARTH

We need your sign to support Project to invent "SMART AND CONTROLLABLE REFLECTIVE BALLOONS" to cover the Sun and Save Our Earth.

More details...

Sign Now!

We are very appreciated for your Prompt Action!

x